Prolink PPS2104N User Manual Bedienungsanleitung

ShareHub Device Server Version 2.00 (English) BEFORE GETTING STARTED This UM is designed to aid you to get started with the device. If you e

EN 7 i) If the wireless network is secured by WPA-PSK or WPA2-PSK, the key formats, shared key and encryption must be set correctly. j) Click Subm

EN 8 3.3.3. Methods for Setting the IP Address You can set the IP address of your Server using one of the following methods, depending on your netw

EN 9 c) If the tool finds multiple Servers in your local area network, then you have to select one Server from the Server List. d) Double click t

EN 10 e) Login with administrator ID (default: admin) and its password (default: admin). f) Click the button corresponding to your choice of IP se

EN 11 4. Using the ShareHub Device Servers 4.1. Introduction The goal of this produce is to provide the ShareHub Device Servers in a single produc

EN 12 4.4. Installation of USB Device Driver Some USB devices, like printers or MFPs (multifunction printers), require to install vendor-supplied d

EN 13 4.5. Using the ShareHub Device Servers a) In the ShareHub Device Servers Control Center, click the ShareHub Device Servers that has the desi

EN 14 f) After you finish using the USB device, click the USB device in the ShareHub Device Servers Control Center and then click the “Disconnect” b

EN 15 The following figure will appear. d) Choose the desired printer. The desired printer must be the Windows printer (this is a logical printer)

EN 16 g) Even you already properly setup an auto-connected printer, the ShareHub Device Servers Control Center must be running (in the background) w

Table of Contents Table of Contents ...

EN 17 c) Click the “Network Scanner” button. Then you can see that the ShareHub Device Servers Control Center will automatically do a “connect” oper

EN 18 4.8. USB Storage You must use “manually connect” for USB storage. After you connect a USB storage, like the following picture, your PC will ha

EN 19 4.9. Request to Connect If a USB device is manually connected by any other user, basically you cannot connect that device. However, we offer a

EN 20 5. File Server This chapter describes the file server function of the Server which allows USB storage devices to be shared across a network b

EN 21 5.3.4. Configuring the Server’s Codepages Users can use the following methods to set the Server’s codepage. a) Start ShareHub Device Servers

EN 22 h) If you clear Enable SMB/CIFS Print/File Server Authentication in Supported Protocols, you login to the SMB server without requiring authent

EN 23 6. The Servers’ Web Pages 6.1. Introduction The Server runs the http server, httpd on TCP port: 80. Users may use the web pages to see the

EN 24 6.2.2. Setting up Server Configuration To set up the Server configuration, click on the “CONFIG” icon ad then the system will request user to

EN 25 o Administrator: enter your desired administrator name. o New Password: enter your desired password. o Re-type Password: re-confirm the pass

EN 26 7. Troubleshooting This chapter provides useful information to help you resolve difficulties that you may experience with your Server. Fault

5. File Server ...

EN 27 8. Restore Factory Defaults You may restore the Server’s default parameters by one of the following methods. 8.1. Using the Server’s Web Pa

EN 28 9. Upgrade Firmware This chapter describes how to upgrade firmware. Please follow one of the following Procedures: Procedure A: Using the

EN 29 10. The Init Button The Init button is used for maintenance: Simultaneously press Init button and turn on (by plugging in the power adaptor)

Register Online For Your Product Warranty @ www.prolink2u.com/register PROLiNK® is a trademark of FIDA INTERNATIONAL (S) PTE LTD and is manufactured

EN 1 1. Introduction Thank you for purchasing PROLiNK® ShareHub Device Servers (PPS2101/PPS2101N/PPS2104N). This Server is designed to connect your

EN 2 2. Product Overview 2.1. Package Contents Verify that nothing is missing from the package by using the checking list below. Please contact yo

EN 3 2.2.3. Supported USB Devices The PROLiNK® ShareHub Device Servers supports the following types of USB devices.  USB Printer  USB multifunc

EN 4 3. Basic Installation 3.1. Connecting the Hardware a) Make sure that your USB devices are switched off and that the Server’s Power Adapter i

EN 5 c) If the tool finds ShareHub Device Servers in your local area network, then you have to select a server from the server list. d) Double cli

EN 6 f) Click Wireless icon. g) In order to join an existing wireless network, you have to set the correct SSID, and the correct security method