Prolink PHS100 Linux Installation Guide Bedienungsanleitung

Fedora core 1. Insert data card into Linux Fedora core 2. When the CD-ROM device pops up, move cursor on data card icon and press right key and sele

3. It may be failed at the first time, please select Eject again. 4.Open Terminal,type in the following command lsusb If modem card device is OK, i

(May be some error happened, don’t mind.) 6. Type in the following command, as photo below. sudo modprobe usbserial vendor=0x05c6 product=0x900

If you find /dev/ttyUSB0~2,the device driver is OK! 8. Open GHOME PPP,type in Username/Password,Phone number is *98#. Then Press Setup. 9. M

10. Type in the command: AT+CGDCONT=1,”IP”,””CMNET”

(APN providedby your operator for data connection)in Modem initialization string column then press Close.As photo bellow. 11.Return Setup page

12. Then return GHOME PPP and select Connect.

After the LED flashing, it means it’s connected now. Enjoy surfing on the internet.

(May be some error happened, don’t mind.) 6. Type in the following command, as photo below. sudo modprobe usbserial vendor=0x05c6 product=0x900

8. Go to System/Administration/Network and the following screen will pop up 9. Press New and choose device type: modem connection then press Forward

11.The following screen pops up and manually input /dev/ttyUSB2 as photo below

12. Type in Phone number: *98# and fill in any Provider name, login name and password as you wish then press Forward. 13. Press Forward directly whe

14.Press Apply. 15. Go to System/Administration/Network and a new device is found. Move cursor on the modem and press Edit.

16. Tap Advanced and type in the command: AT+CGDCONT=1,”IP”,””CMNET” (APN providedby your operator for data connection)in Modem initialization string

16. Press Activate then OK. 17. Press Activate. After the LED flashing, it means it’s connected now. Enjoy surfing on the internet.

Ubuntu 1. Insert data card. 2. When the CD-ROM device pops up, move cursor on data card icon and press right key and select