Prolink PHA-1068 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Prolink PHA-1068 herunter. PROLiNK PHA-1068 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
PHA-1068
Key Features
Industrial grade IP67 rugged cast aluminium casing
Up to 25 km range with External Antenna ++
Up to 108 Mbps (Turbo Mode)
500mW output power transmission
Bandwidth control with QoS VOIP and video
Web and SNMP management
Professional vehicle transceiver
Wireless Features
IEEE 802.11g compliant radio, up to 54Mbps
• Up to 108Mbps wireless data rate at turbo mode
RF Power Control. The transmit power can be adjusted
by software control between 100% to 12.5% of
maximum radio power
• Support seamless roaming within the same subnet
between Access Point (In repeater and client mode)
• Up to 250 association and 50 con-current users
• Support with or without wireless distribution system (WDS)
• Dual antenna diversity
Network (Internet and Intranet)
Protocol Filtering
Security and Access Control for Access Point Mode
Support static WLAN WEP up to 152 bits encryption
• MAC Address Control
• WPA with Radius Server for (EAP-TLS, EAP-TTLS) PEAP
(EAP-GTC)(In Access Point mode)
• WPA-PSK (AES and TKIP)
Wireless to wireless user isolation
Management
Web-based management
• IP address discovery software (Viper Quick Start)
• Firmware upgradeable through web-server and telnet
Hardware
Antenna connectors: Two 50-Ohm N-type (Female)
• Chassis Type: IP67 Rating with Bracket for mounting
Ethernet Port: 10/100 Base-T (RJ-45 connector) with auto
MDIX
Power Specification
Power adapter: 18~48V DC through RJ45
• Power Consumption: Typical 8.5 Watts, 9.0 Watts Max
Environment
Operating Ambient Temperature: -35ºC to 75ºC
• Relative Humidity when operational : 20~90% (non-
condensing)
• Storage Ambient Temperature: -35ºC to +90ºC
• Relative Humidity during storage: 95% Max (non-
condensing)
Standard Package
The standard package for AP-1068 comes with :-
1) PHA-1068
2) 48VDC combiner Adaptor (PoE)
3) Screws and washers
4) Mounting bracket (For walls or pole mounting)
5) N type to SMA type adaptor x2
6) 2 dBi Antenna x2
7) 3m cable with IP67 RJ45 connector
Outdoor AP, Repeater, Point to Multi-Points
Outdoor AP, Repeater, Point to Multi-Points
Wireless Bridge & Professional Vehicle
Wireless Bridge & Professional Vehicle
Transceiver
Transceiver
Specification are subject to changes without prior notice due to engineering improvement. Wireless range
and performance may vary with environment. All brands and product names are trademarks or registered
trademarks of their respective holders.
++With 23dBi Grid Parabolic Antenna on each station. Distance may vary with environment.
RF Specification
Frequency Range 2.4 ~ 2.4835 GHz
Wireless Data Rate 54, 48, 36, 24, 18, 12, 11, 9, 6,
5.5, 2, 1 Mbps
Up to 108Mbps for Turbo mode
Channels 11 channels (USA/Canada),
13 Channels (Singapore, Europe
except France),
14 Channels (Japan)
Transmit Output Power 27dBm ± 2dBm
Nominal Antenna Port
Impedance
50 Ω x 2 (for external antenna
connector, if applicable)
Media Access Protocol CSMA/CA with ACK
Modulation Technique DSS DBPSK, DQPSK, CCK
OFDM BPSK, QPSK, 16QAM,
64QAM
Receiver Sensitivity Bit Rate PER Signal
54Mbps 10% -73bBm
11Mbps 8% -86dBm
6Mbps 10% -88dBm
1Mbps 8% -91dBm
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - PHA-1068

PHA-1068Key Features• Industrial grade IP67 rugged cast aluminium casing• Up to 25 km range with External Antenna ++• Up to 108 Mbps (Turbo Mode)•

Kommentare zu diesen Handbüchern

Keine Kommentare